HEX copper bonded earth rod are made from low Carbon Steel of grade BS 970 or AISI 1018 with a high tensile strength of at least 600 N/mm2 . Low carbo...
HEX copper bonded earth rod are made from low Carbon Steel of grade BS 970 or AISI 1018 with a high tensile strength of at least 600 N/mm2 . Low carbon steel core are molecularly bonded with 99.9% pure electrolytic copper.
Salient Features :
Perfectly bonded rod will last longer, drive easier and will not crack.
Corrosion resistance while providing the lowest resistance to ground. Threads are rolled by roll threading process, which ensures that an even copper covering is maintained, even at the root of the thread. Roll thread gives greater strength than cut thread.
Thread rolling process raises the surface of the rod, so that Thread dia. (T) is greater than Shank dia. (S).
Copper Bonding Thickness - 25 Microns.
HEX copper bonded earth rod are made from low Carbon Steel of grade BS 970 or AISI 1018 with a high tensile strength of at least 600 N/mm2 . Low carbo...
HEX copper bonded earth rod are made from low Carbon Steel of grade BS 970 or AISI 1018 with a high tensile strength of at least 600 N/mm2 . Low carbon steel core are molecularly bonded with 99.9% pure electrolytic copper.
Salient Features :
Perfectly bonded rod will last longer, drive easier and will not crack.
Corrosion resistance while providing the lowest resistance to ground. Threads are rolled by roll threading process, which ensures that an even copper covering is maintained, even at the root of the thread. Roll thread gives greater strength than cut thread.
Thread rolling process raises the surface of the rod, so that Thread dia. (T) is greater than Shank dia. (S).
Copper Bonding Thickness - 25 Microns.
PLASTIC EARTH PIT / HOUSING
Material : Plastic
This 'HEX' Earth housing pit is manufactured from heavy high-grade polypropylene for high streng...
PLASTIC EARTH PIT / HOUSING
Material : Plastic
This 'HEX' Earth housing pit is manufactured from heavy high-grade polypropylene for high strength & stress levels to absorb a maximum load of 5000 kg. Stabilised against degradation by non-brittle and by sunlight to prevent cold weather damage. The light weight feature allows easy handling, storage and transportation, thus increasing installation efficiency. Termination area is increased by 100% due to simple locking of two units together, allowing deeper earth electrode connections to be made and reducing the effects from harmful voltage gradients.
Product Code : HEP
EARTH ROD SEALS
Material : Plastic
The earth rod seal is fitted when the earth rod connection is below the water level and where there is a possibility of water entering the inspection housing from below ground. HEX earth seals are specifically designed to suit earth Rods of various diameters from 1/2" to 3/4 ". These seals are used alongwith
HEX earth Pils.
Product Code : HES - 1234
P.S. : Please specify Earth Rod diameter to be used with.
EARTH BARS FOR EARTH PITS
These earth bars fit into the slots provided in the earth pits housings and are used
when multiple connections to the grounding rod are required.
Material : Copper