HEX

These are more commonly used. These tublar terminal ends, manufactured from soft drawn, pure, high conductivity copper tubes conforming to BS 1977. They are fully annealed to ensure qualities of electrical and mechanical strength. These are also produced from aluminium tube.

They are manufactured from soft drawn bare copper tube as per BS-1977 and aluminium to obtain hgih electrical & mechanical strength. They are used for straight through joints for joining of cable conductors.

They are manufactured from high conductivity copper and are Electrotinned for corossion resistance. Ring type terminal ends are available in different sizes, to serve the different joining techniques such as Crimping, Soldering and Welding.

Three types are available in this type of terminal ends Round, Regular and Flat. They are mainly used for Control Cables, Terminal station, Flexible cord, For smaller sizes of cable etc. Pin type terminal ends are generally available for Crimping type of connections which are made out of high conductivity copper.

This type of terminal ends are mainly used for urination flexible wires, Cords, Control cables, Meters of control panel/switchboard, Contractors etc, according to the requirement's. They are made of High conductivity copper and are for Crimping.

Reducer or copper pin terminals are produced to meet the needs of cable entering, copper tunnel clamps such as fine Gears, Cutouts, Meters etc. They can be connected by the crimping method.

BW CABLE GLAND (2 PART)

We are engaged in offering BW Cable Gland (2 PART) which is in line with BS 6346 (1969) standards. Available in GEL (cast integral eartn lug), these are used with armour or braided cable. Further, this secure armoring & provides electrical continuity between armour & gland entry component that are used for dry and indoor condition.

Design Features : 2 part armour lack, Knurled armor lack produces a low resistance earth clip.
Application : For use with armour or braided cable, secures armouring & provides electrical continuity between armour & gland entry component made used it dry and indoor condition

Design Features : 2 part armour lack, Knurled arrnour lack produces a low resistance earth clip.
Also available in GEL (cast integral eartn lug), for orders add" C" to prod. code

BW CABLE GLAND (3 PART)

Our range of BW Cable Gland (3 PART) is manufactured using quality raw material and is available with an extra component. This prevents rotation of the wire and is used instead of a knurled cone.

Technical Specifications
Glands- Bodies, Caps & Rings are manufactured from brass.
Seals- Nitrile rubber
Shrouds / Steeves- Black Poly Vinyl Chloride (PVC)
Earth tag - Natural Brass
Similar in application and design to the BW (2 part) gland. However an extra component is added, a cone ring.

This prevents rotation of the wire and is used instead of a knurled cone

We offer quality and durable range of CW Cable Gland (3 PART). These are used both indoor and outdoor, in all climatic conditions, as it is weatherproof & waterproof. Our range is further provided with a wire that is used instead of a knurled cone.

Application:
For use with armored cable
Secures armoring and provides electrical continuity between armour and gland entry component
Also provides a seal on the outer sheath of the cable thus ensuring no damage to cable sheathing
Specifications:
Design Features: 2 part Armour/Earth Lock, Knurled Armour Lock produces a low resistance earth clip
Application : For use with armoured cable, secures armouring and provides electrical continuity between armour and gland entry component. Also provides a seal on the outer sheath of the cable thus ensuring no damage to cable sheathing. These are used both indoor and outdoor, in all climatic conditions as it is weatherproof & waterproof.

Design Features : 2 part Armour/Earth Lock, Knurled Armour Lock produces a low resistance earth clip.
Also available in CIEL(cast integral earth lug) for orders add" C " to prod. code.

Our range of roller type stainless steel cable are simple in construct and are easy to install. Engineered to perfection, these roller blades are used in various industries like construction, petro- chemicals, fire protection etc.

Features :
This roller ball design tie are self locking and very easy to install.
Fixing can be done by hand, tool & both.

Specification:
Min. loop tensile strength - 4.6mm width (44.5kg) 100 lbs
Min. loop tensile strength - 7.9mm width (113.6kg) 250 lbs

Operating Temperature:
80°C to +150°C (Coated)
80°C to +538°C (UnCoated)

Applications:
Construction, Automobile, Offshore, Petro-Chemical Industries, Fire Protection, Aerospace, Flame Proof Installation etc.

Manufactured using quality material, our range of stainless steel cable ties are designed for easy fastening and unfastening. The special coating makes our range of cable ties resistant to rust and corrosion.

Features:
This ties have greater flexibility as it can Fasten-Unfasten-Refasten as per usage.
Coated ties are used (or added resistance to corrosion and weathering effect.

Operating Temperature:
80 0C to +150°C (Coated)

“HEX” offers a complete range of DIN RAILS for the mounting of terminal blocks, MCB's etc. These steel rails are manufactured from cold roll steel and processed in various types through rolling. The finish is zinc electroplated with yellow passivation. Also available with white passivation, as per RoHS compliance, against specific order.
All rails are available in 1 mtr. & 2 mtr. Length and in three types I.e. Plain (P), Punched / Dotted (D) & Slotted (S)

"HEX" offers a complete range of DIN RAILS for the mounting of terminal blocks, MCB's etc. These steel rails are manufactured from cold roll steel and processed in various types through rolling. The finish is line electroplated with yellow passivation. Also available with white passivation,as per RoHS compliance, against specific order. All rails are available in 1 mtr. 8 2 mtr. length and in three types ie. Plain (P),
Punched/Dotted (D)8 Slotted (S)
Hex Prod. Code: - HDR - 3575 Size:- 35mm x 7.5mm
Hex Prod. Code : - HDR - 3215G Size :- 32mm x 15mm x 9mm
Hex Prod. Code : - HDR -1555 Size : - 15mm x 5.5mm